Skip to content

Drain & Sewer Plumber Gold Coast

Blocked Drains & Sewer on the Gold Coast: the short answer

A blocked drain on the Gold Coast is usually cleared on the first visit with an electric eel or a high-pressure jetter for $150-400, or $350-650 for heavy grease, roots or a blockage far down the line. If it has blocked before, a CCTV inspection ($220-350) finds the cause, which on canal lots is often a sagged or cracked pipe in the dredged sand; relining is $400-650 a metre, trenchless. If the neighbours have the same problem, the blockage may be in the City of Gold Coast sewer main: council crews attend 24 hours on 1300 000 928.

Updated 8 October 2026. 2026 reference prices; the plumber confirms the price in writing before work starts.

Drain & Sewer Plumber Gold Coast

Clear It Today, Find Out Why, Fix It So It Stays Fixed

A blocked drain announces itself the same way everywhere: the shower fills when the toilet flushes, the floor waste in the laundry gurgles, and eventually something comes up that should have gone down. What is different on the Gold Coast is why. The city was built on sand, canals, clay and bushland in four different decades, and each combination blocks its drains for a different reason. A drain plumber who knows which is which clears it faster and, more importantly, stops it coming back.

Why Gold Coast drains block

Settled canal fill. Bundall, Broadbeach Waters, Mermaid Waters, Runaway Bay, Hope Island, Paradise Point and Burleigh Waters were built on sand dredged from the waterways. Decades later that sand is still settling, and the sewer lines laid in it have dropped out of grade. A section that sags holds water and solids, the joints open, and a camera down the line shows a belly full of sediment where a blockage forms every few months.

Tree roots. Benowa, Currumbin, Elanora, Tallebudgera and the older streets of Southport and Nerang were planted forty years ago with figs, camphor laurels and palms that are now fully grown. Roots follow moisture into every crack and joint, and a drain that blocks every wet season is almost always a root problem.

Old clay pipe. Pre-1980 homes in Southport, Labrador, Miami, Palm Beach, Tugun and Coolangatta still run earthenware sewers that crack, shift and collapse. The walk-up unit blocks along the beachfront share those lines, so one blockage affects every unit.

Wipes, grease and debris. In the new estates of Coomera, Pimpama and Upper Coomera the pipe is usually fine and the blockage is wet wipes, sanitary products or plaster and grout left in the line by trades. Along the dining strips of Surfers Paradise, Broadbeach, Burleigh and Coolangatta it is restaurant grease in shared lines.

Pumps. Waterfront and low-lying homes that pump sewage to the main stop draining when the pump, its float switch or its non-return valve fails.

What happens on the first visit

The plumber starts at the overflow relief gully or an inspection opening and clears the line with a high-pressure water jetter, which cuts roots and flushes grease and wipes, or an electric eel where the pipe is fragile. Most blockages are cleared on that visit and the house is back in use. If the drain has never blocked before and the cause was obvious, that is often the end of it.

If the drain has blocked before, or the jetter met resistance that felt like a break, the plumber recommends a CCTV camera inspection. The camera goes down the line and shows the sag, the roots, the crack or the collapse, and a locator on the surface marks exactly where it is and how deep. You see the footage. Clearing a drain three times a year without looking is the most expensive way to own a sewer.

Fixing the cause

Relining installs a resin liner inside the existing pipe that cures into a new pipe, with no trench. It suits the cracked and root-invaded lines under driveways, slabs and canal revetment walls where digging is expensive or impossible, and it is the usual answer in the established suburbs. Section replacement is used where a pipe has collapsed or a belly is too severe to reline; the locator means the dig is small and in the right place. Pump repairs cover float switches, impellers, non-return valves and control panels on the pump wells of canal and low-lying homes, with replacement quoted when the pump has reached the end of its life.

Stormwater and storm season

From December to March the Gold Coast gets the rain that fills stormwater drains, backs up floor wastes on flat lots near the Broadwater and the Nerang River, and floods the absorption trenches of hinterland septic systems. Severe storm and rainfall warnings for the region are published by the Bureau of Meteorology. Stormwater drains block with leaves, roots and silt the same way sewers do and are cleared the same way. If water is coming up a floor waste during a storm and the sewer is clear, the stormwater is the culprit, and the fix is usually clearing the line and the pit rather than anything inside the house.

Commercial drains

Restaurants, cafes, holiday lets and body corporates have the same drains with more use. Grease traps, trade waste lines and shared risers are cleared and maintained on a schedule so a Friday-night blockage does not close the kitchen. See commercial plumbing for how that works.

Who pays: you or the council

You are responsible for the sewer from the house to the connection with the council main, usually at the boundary. The City of Gold Coast is responsible from there. If the camera shows the blockage in the council’s section, the plumber will say so and help you report it. That happens more than you would think, and charging you to clear a council main is not something we do.

What's included

  • High-pressure water jetting or electric eel to clear the blockage on the first visit
  • CCTV camera inspection to find roots, sags, cracks or collapsed clay pipe
  • Pipe locating so any dig is in the right place
  • Pipe relining or section replacement when clearing is not enough
  • Sewage pump, macerator and pump-well repairs on canal and low-lying lots
  • Stormwater and floor waste clearing after storms
  • Grease trap and trade waste line clearing for restaurants and cafes
  • Written report with camera footage where an inspection is done

Signs you should act now

  • Water backing up into the shower or floor waste when the toilet flushes
  • Gurgling from drains or toilets, especially after rain
  • Sewage smell in the yard, the garage or near the overflow relief gully
  • More than one drain in the house running slowly at the same time
  • The overflow relief gully outside is lifting or overflowing
  • A drain that has been cleared before and is blocking again

Wet wipes are not flushable

Every blocked sewer plumber on the Gold Coast pulls out wet wipes labelled flushable. They do not break down, they catch on roots and joints, and they are the most common cause of blockages in newer estates in Coomera and Pimpama where nothing else is wrong with the pipe.

What it costs

2026 Gold Coast reference ranges, labour included. The plumber confirms the price in writing before work starts.

Standard blocked drain clearance (electric eel or jetter)$150-400
Hydro-jetting (heavy grease, roots or a distant blockage)$350-650
CCTV drain camera inspection (standalone, with report)$220-350
Mechanical root cutting (tree roots in the sewer)$400-800
Sewer relining (per metre, trenchless)$400-650 per metre

Full price list and price estimator →

Whose pipe is it: yours or the City of Gold Coast's?

Your propertyStreetboundary15234
City of Gold Coast Yours
  1. Water main. The City of Gold Coast's. A leak in the street or on the footpath is theirs to fix: report it on 1300 000 928, 24 hours.

  2. Main-to-meter pipe and the meter. The City's. It repairs the water supply system up to and including your water meter.

  3. Pipes from the meter to the house. Yours. Every pipe and fitting on the property owner's side of the meter is the owner's to maintain and repair, including the pressure pump on a canal or tank-water home. In a tower or unit block, the pipes after the main meter belong to the body corporate.

  4. House drain and overflow relief gully. Yours, from the house to the point where your drain joins the council sewer, usually at or near your boundary. The overflow relief gully (the grated drain outside the laundry or kitchen wall) must be kept clear and working; it is the one safety valve your sewer has.

  5. Council sewer main. The City's. Its maintenance crews repair the sewerage network around the clock, and a spill or blockage in the main is theirs to clear.

A sewer blockage is probably the City's if

  • the overflow relief gully keeps overflowing while nobody is using water
  • your neighbours have the same problem, or sewage is coming up in the street
  • a council manhole nearby is overflowing

It is probably in your pipes if

  • it only overflows when taps, toilets or showers are being used
  • one toilet, sink or shower drains slowly and the neighbours are fine
  • your home is on a canal lot or old clay drains and it has blocked before
Typical layout; yours may differ. Rules as published by the City of Gold Coast, checked October 2026. Water and sewerage faults, 24 hours: 1300 000 928.

Frequently asked questions

Can a blocked drain be cleared on the first visit?

In almost every case, yes. A high-pressure jetter or an electric eel clears most Gold Coast blockages, including roots, wipes and grease, on the first visit. The exception is a collapsed or badly broken pipe, which is cleared as far as possible and then repaired or relined with a price agreed first.

Why does my drain keep blocking?

A drain that blocks repeatedly has a physical fault: a section that has sagged and holds water, a crack letting roots in, a joint that has opened, or a collapsed clay pipe. On the Gold Coast the usual reasons are settling on canal fill, roots from mature figs and camphor laurels, and clay sewers in pre-1980 suburbs. A camera inspection shows exactly which, and clearing it again without looking just books the next call.

What is pipe relining and does it work on the Gold Coast?

Relining installs a resin-saturated liner inside the existing pipe, which cures into a new pipe within the old one, with no trench. It suits cracked, root-damaged or sagging lines under driveways, slabs and canal revetments where digging is expensive or impossible. It does not fix a fully collapsed section or a severe belly, which need excavation.

What is the overflow relief gully and why is it overflowing?

The overflow relief gully is the grated outlet in the yard, lower than the internal floor wastes, designed to overflow outside if the sewer backs up so sewage does not come up inside the house. If it is discharging, the blockage is downstream of it, usually in the sewer line to the street or in the council main. Stop using water and call.

Do you fix sewage pumps on canal homes?

Yes. Many waterfront and low-lying homes in Hope Island, Sanctuary Cove, Runaway Bay, Paradise Point and the canal estates pump their sewage up to the council main because gravity cannot. Float switches, impellers, non-return valves and control panels fail, and when they do the well fills and the house cannot flush. Pump repairs and replacements are quoted on site.

Is the blockage my responsibility or the council's?

The property owner is responsible for the sewer line from the house to the connection point with the council main, which is usually at or near the boundary. The City of Gold Coast is responsible from the connection onward. If the camera shows the blockage is in the council main, the plumber will tell you and help you report it rather than charge you for work that is not yours.

Areas we cover for this service

First five minutes

Plumbing Emergency? What to Do Right Now

Pick what is happening. These are the safe first steps for the next five minutes, before the plumber arrives.

Burst or leaking pipe: what to do now

Stop the water first, then deal with the mess.

  1. Turn the water off at the meter. Houses: the meter sits in a box at the front boundary, in the ground or on a short stand near the footpath. Turn the tap clockwise, or turn the lever a quarter-turn so it sits across the pipe. Apartments: look for the isolation valve in the meter cupboard on your floor, in the laundry, or under the kitchen sink.
  2. Keep water away from electricity. If water is near power points, lights or appliances, switch the power off at the switchboard, but only if you can reach it without standing in water.
  3. Drain what is left in the pipes. Open a cold tap at the lowest point of the home (a garden tap is ideal) and switch the hot water system off at the switchboard or the gas tap.
  4. Limit the damage. Buckets and towels under the leak, furniture and valuables moved, and photos for your insurer before anything is cleaned up. In a tower or walk-up, tell the building manager if water may reach the apartment below.

Don't use electrical appliances in a wet room, and don't turn the water back on to test it.

Smell of gas: what to do now

Get out first. Make every call from outside.

  1. Don't touch anything electrical. No light switches, exhaust fans or appliances, and no flames or cigarettes. A single spark can ignite gas.
  2. Turn the gas off at the meter or the bottle if you can reach it safely. Mains gas: the handle on the meter is off when it sits across the pipe. Bottled LPG: close the valve on top of the cylinder clockwise.
  3. Open doors and windows and get everyone outside. Pets too. Stay out until you are told it is safe.
  4. From outside, call 000 if the smell is strong, or 1800 427 532 for a leak. 1800 427 532 is the 24-hour gas emergency line of Allgas, the gas network for the Gold Coast. They attend free of charge and make the supply safe. If anyone feels unwell or there is a fire, ring 000 first. Call 1800 427 532 (gas leaks, Allgas)
  5. Then book a licensed gas fitter. The network makes the supply safe. Finding and repairing a leak on your side of the meter, and certifying the work so the gas can go back on, is a licensed gas fitter's job.

Don't go back inside to look for the leak, and don't relight pilot lights yourself.

Sewage or drains backing up: what to do now

Every litre you send down the drain comes back up.

  1. Stop running water. No flushing, taps, showers, washing machine or dishwasher until the blockage is cleared.
  2. Keep people and pets away. Sewage is a health hazard. Wear gloves and wash well if you have to touch anything.
  3. Check the overflow relief gully outside. It is the grated drain against an outside wall, usually near the laundry or kitchen. Clear pot plants, leaves and mulch off it so any overflow happens outside and not through your floor wastes.
  4. Ask next door. If the neighbours have the same problem, or sewage is coming up in the street, the blockage may be in the City of Gold Coast sewer main. Council crews attend sewer spills 24 hours a day on 1300 000 928. Call 1300 000 928 (City of Gold Coast faults)

Don't pour chemical drain cleaner into a blocked drain. It rarely clears a sewer blockage, and it is dangerous for whoever opens the pipe next.

No hot water or leaking tank: what to do now

A leaking tank is urgent. A cold shower is usually a repair, not a disaster.

  1. Leaking tank? Turn off its water supply. Close the tap on the cold-water pipe going into the unit.
  2. Turn off its power or gas. Electric: switch off the hot water circuit at the switchboard. Gas: close the gas tap on the pipe to the unit.
  3. No leak, just cold? Electric: check whether the hot water breaker has tripped. Gas: check that your other gas appliances work and whether the pilot light is out; relight it only by following the instructions printed on the unit. Tank-water property: check that the pressure pump is running and the tank is not empty.
  4. Read the label. Note the brand, model and size printed on the tank. It lets the plumber quote a repair or a replacement before arriving.

Don't block or cap the relief valve that drips from the side of the tank. It is a safety device.

Overflowing or blocked toilet: what to do now

Stop the water going in before you do anything else.

  1. Turn off the tap behind the toilet. It is the small tap on the wall or floor beside the cistern. Turn it clockwise.
  2. Don't flush again. If the bowl is still filling, lift the cistern lid and push the outlet valve down, or lift the float.
  3. Mop up straight away. In an apartment or holiday let, tell the building manager if water may reach the apartment below.
  4. Check the other drains. If the shower or floor waste gurgles or backs up as well, the blockage is in the sewer line: follow the sewage steps.

Don't keep plunging once water reaches the rim, and don't use chemical cleaners.

General guidance only. If anyone is in danger, ring 000.

How it works

Blocked Drains & Sewer in Four Steps

  1. 1
    Stop the backflow

    Stop using water in the house so nothing else comes up. If the overflow relief gully is discharging outside, that is doing its job and protecting the inside.

  2. 2
    Clear it

    The plumber clears the blockage with a jetter or eel from the gully or an inspection opening, usually within the first visit.

  3. 3
    Find the cause

    If the drain has blocked before, a camera goes down the line to see roots, sags, cracks or collapsed pipe, and the fault is located from the surface.

  4. 4
    Fix it for good

    You get a quoted price for relining, replacing a section or repairing the pump, and a copy of the footage and report.

Call now Get a quote